Classification

Contact Us

501, 502 and 601, Building 4, Phase 2, Beijiao Kai Tak Real Estate Park, Shunde District, Foshan City, Guangdong Province

+86-13827784647

wanxia_sd@163.com

WX-T1203 degreasing powder

Keywords: water-based epoxy resin/water-based acrylic resin/water-based polyester resin.

Product Classification:

Telephone:

Product Details

1. Overview
WX-T1203 by inorganic alkali, corrosion inhibitor, anionic and non-ionic surfactants such as high-efficiency chemical degreasing, a variety of mineral oils, animal and vegetable oils have good removal ability. Its use temperature is low, long life, degreasing ability is strong, suitable for swimming immersion automatic production line and immersion production line degreasing.

2. use process
Process conditions: soaking, swimming immersion, spray cleaning.
Process flow: oil removal-water washing-post-process treatment.
The workpiece is immersed in the working fluid, and the general grease on the surface of the workpiece can be removed after a few minutes.
The method to check whether the grease is removed is to clean the surface residual liquid of the degreased workpiece with water and observe whether the water film on the surface of the workpiece is continuous and complete. If so, it indicates that the oil has been removed.

3. technical indicators
Grooving: 5% groove, the calculated amount of degreasing powder added to the water, stirring, so that completely dissolved can work.
Time: soak for 5-10 minutes, swim soak and spray for 3-5 minutes (according to the amount of oil stain, add compound degreasing
agent, can increase the efficiency of oil removal)
Temperature: normal temperature -55 ℃
Alkalinity: ≥ 25
Method for detecting alkalinity: take 10ml of working solution, inject it into conical flask, add 30 ml of water, add 2-3 drops of phenolphthalein indicator, titrate with 0.1N H2SO4, the solution changes from red to colorless as the end point, and the ml number of standard solution consumed by titration is the alkalinity point of this solution.

4. use and maintenance
1. Analyze the alkalinity of the degreasing liquid twice per shift. Supplement the degreasing powder according to the degreasing effect and alkalinity. The alkalinity of the working liquid is controlled at 25-35 points. For every supplement of 1.5 kg/m degreasing powder, the alkalinity can be increased by 1 point.
2. Remove the floating oil on the liquid surface in time. If the working liquid is saturated with oil or polluted, it needs to be discharged. Replace some tank liquid or replace the tank again. It is recommended to replace it every 3-6 months.
3. When a large amount of oil, dirt, dust and rust are mixed in the degreasing liquid, the solution can be left standing to clarify for more than 12 hours, the middle layer can be extracted with a submersible pump for reuse, the upper floating oil and the lower mud are discarded, and the degreasing powder is added.
4. For some stubborn oil that is adsorbed in rust and oxides is difficult to remove, the method of oil removal and rust removal can be used alternately, and the temperature of the oil removal tank can also be increased or a compound oil removal agent can be added.

5. considerations
1. Strictly control the relevant parameters of the working fluid and pay attention to maintaining a flat gap between the workpieces.
2, the operator must wear safety protection equipment.
3, if accidentally touched the skin, should immediately rinse with water.

Related Products