Classification

Contact Us

501, 502 and 601, Building 4, Phase 2, Beijiao Kai Tak Real Estate Park, Shunde District, Foshan City, Guangdong Province

+86-13827784647

wanxia_sd@163.com

WX-L101 wax remover

Keywords: water-based epoxy resin/water-based acrylic resin/water-based polyester resin.

Product Classification:

Telephone:

Product Details

1. Overview
WX-L101 wax remover is mainly made of surfactant and wax dissolving agent as raw materials. It is suitable for removing polishing wax on metal surfaces such as copper, zinc alloy, aluminum alloy, iron, stainless steel, etc. It is better to clean with ultrasonic wave. This product is an acidic agent, but it does not hurt the substrate. The treated metal surface does not change color, has a long service life, does not need to be replaced frequently, and the agent can be added.

2. treatment process
Process conditions: soaking, spraying, swimming immersion ultrasonic wax removal.
Process flow: wax removal-water washing-passivation (whether passivation is required according to performance test requirements)-water washing-drying.
Tank matching: add tap water to the 2/3 of the treatment tank, heat to the range, then add WX-L101 wax remover according to the calculated amount, stir fully, add water to the scale, and then use.

3. technical indicators
Groove: 50-100kg/m
Temperature: 50-55 ℃
Time: 3-5 minutes
Total acid: ≥ 30
Total acid detection method: take 10ml of working solution, inject it into conical flask, add 30 ml of water, add 2-3 drops of phenolphthalein indicator, titrate with 0.1N NaOH standard solution, the solution changes from colorless to pink as the end point, and the ml number of standard solution consumed by titration is the total acid (point) of this solution.

Advantages of 4. compared to alkaline wax remover
1, has a stronger wax removal effect;
2, can effectively remove the spot welding part of the oxide, while increasing the brightness of the metal.

Daily management and maintenance of 5. working fluid
Maintenance of working fluid: according to the decrease of wax removal effect or the total acid is not within the range, wax remover can be added to reach the range, and the total acid of 2KG of reagent added per ton of tank will rise by about 1 point; According to the performance test requirements after wax removal, wax removal additives can be added to adjust the tank solution. If the working solution is saturated with wax or the viscosity of the solution increases, some tank solutions need to be filtered, replaced or replaced.

6. considerations
1. Parameters of equipment and working fluid;
2, each process must be cleaned;
3. When working in an environment with good ventilation conditions, the operator should wear safety protective equipment. If the liquid medicine touches the skin or eyes, it should be rinsed with clean water immediately. In severe cases, medical treatment should be sought.

Related Products